1 / 2
Lookout fetish - kirikou (fusion360) — zdjęcie 1
1 / 2

Lookout fetish - kirikou (fusion360)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A model of the fetish on Sorceress's roof in the film "Kirikou and the Sorceress".

Ocena
0 / 5
Polubienia
1
Pobrania
43
Wydruki
0
Wyświetlenia
338
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution

I loved the film “Kirikou and the Sorceress” when I was a kid and the fetishes always fascinated me so I tried to recreate this one for 3dprinting. 

The film was made at the time where films were made to be good and not for DEI bullshit, modern productions would be completely incapable to produce such a marvel. It's when you look back at what was made at that time that you realise how much quality was lost and how much in fact it harmed the people it supposedly defends.

 

(image from: https://www.simbasible.com/kirikou-and-the-sorceress-movie-review/)

 

Printing Information:

There are 3 pieces that need to be printed individually: the body, the neck and the head

(split the model to pieces in your slicer)

  • Print the neck upright on a circular face, add a brim if needed
  • The body can be printed normally upright with supports for the overhangs.
  • The head should be printed flat on the bed with normal supports for the eyes and the neck hole, you can then pause the print at the different layers to change colors as needed. By default if should be done at: 8mm, 9mm and 10mm. The color order is black-white/gray-red and finally black again 

 

The fusion360 file is provided would you want to make some changes, for example in terms of tolerances.

Tagi