USB cable holder / wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to hold USB cables of all kinds.
- Ocena
- 4,5 / 5
- Polubienia
- 10
- Pobrania
- 184
- Wydruki
- 2
- Wyświetlenia
- 608
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Designed to hold USB cables of all kinds.
Both ends of each cable are held at the top of the holder so you can clearly see which cable you are picking out. Also, this allows the cord to hang only half its overall length below.
Included is the original Fusion 360 source file, as well as 20 individual .stl files so you can choose the best one for your needs. The individual .stl files hold from 1 to 10 cables, making it possible to tailor the capacity of your cable holder, as well as to add or replace prints to change its capacity in the future.
The holder is mounted to wall with small head (~5.5 mm) screws.
Should print just fine in PLA without the use of a brim.