Modular Hydroponics Tower for Euro Boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy version of a hydroponics tower, designed to be placed on a Euro Box for indoor use.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 1263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modular Hydroponics Tower for Euro Boxes
Model 1, as of June 18, 2024
Before you read this…
Please note, that this tower model was designed for stability, optimum flow and easy handling. If you are looking for something that is fast to print and uses only little filament, this is definitely not it. ;-)
Total printing time: approx. 213 h
Filament required: approx. 5,6 kg
Why I created this tower
Some months ago, I started my journey into hydroponics, because I was fascinated by the idea to grow herbs, lettuce and vegetables indoors with minimal space requirements.
So, I studied several tower designs and decided to print blove’s clever remix:
https://www.printables.com/model/720081-modular-hydroponic-tower
Right from the start, I was not so happy with the idea of putting the tower on top of a bucket, because I wanted to use it indoors and needed a “mobile” solution, I could move around in the room with ease.
Instead of printing the bucket lid, I created an adapter for Euro Boxes, a standardized system based the “Euro Measure” (1200 x 800 mm). There are numerous manufacturers of stackable Euro Boxes and accessories - just ask Dr. Google.
To make things clear: I am neither associated with any of these manufacturers, nor do I advertise any of these products. I just like this clever and versatile system.
Well, I chose the following elements as a base for the tower:
- 1 open box 600 x 400 x 420 mm with side opening and a separate lid:
https://www.auer-packaging.com/de/de/Sichtlagerkästen-im-Euroformat-SK/SK-L-6442.html?color=7001
- 2 boxes 400 x 300 mm with lid (weight capacity 24 kg each):
https://www.auer-packaging.com/de/de/Eurobehälter-mit-Scharnierdeckel/ED-4322-HG.html?color=7001
- 1 flat transport cart:
https://www.auer-packaging.com/de/de/ESD-Transportroller/ESD-RO-64.html
These components result in a very stable and moveable pedestal for 2 towers back to back, sturdy enough to carry the towers, 2 x 12 l of nutrient solution, several bottles with fertilizer and ph down plus the electrical components.
So, I printed my first tower, created a matching Euro Box adapter, 2 supports to reinforce the rather thin lid and started my first hydroponic system, including a countdown timer, a pump and some simple grow lights from Amazon.
After some weeks, I made the same observations, blove describes in his very informative and useful videos (e.g. fertilizer crystals emerging from the tower walls, nutrient solution splashing out of the gaps between the modules or between module and planting pots).
But apart from that – everything worked pretty amazing.
The longer I grew my plants, the more some shortcomings moved into focus:
Either by my own mistake or by design, I could not align the tower modules in exactly the same position, that would allow for an evenly light distribution to all planting pods.
Moreover, the locking mechanism showed more and more wear, which lead to modules “blocking”, so I could not fully lock them against each other any more. This became rather annoying, because the non-locking modules would move, whenever I was handling a planting pod.
After about 5 months, the whole tower got a bit “wobbly” with a tendency to bend a little to one side, resulting in an unevenly flow inside.
But hey – this tower model was designed to save printing time and material and had fully delivered – so, no complaint here.
Now, being German, I was itching to optimize this design, and I decided to construct a tower with the following characteristics:
- Easily stackable modules, that will stay aligned and do not twist, while handling the planting pods.
- The modules should be held in place rather by gravity, instead of having to lock them.
- The tower should be balanced to allow for an evenly flow inside.
- Splashing and scaling should be reduced to a minimum. This is why I did not integrate any spacer elements into my design (to reduce the number of gaps).
- The tower should be more silent, by guiding the liquid flow away from the middle (to avoid drops falling down “unused”).
- The modules should have bigger accessory adapters, in order to install grow light fixtures and to retain cables.
- Each module should have 4 planting pods, arranged asymmetrically, so the tower has a “back side”, allowing 2 towers to be placed back to back or 1 tower to be placed against a wall.
- The planting pods should be easy to install/remove.
As you will know from your own 3D printing projects: A more detailed and robust model leads to higher filament use and longer printing times. So, if you have read this article up to this point, it is time for the bitter truth:
Even when printing with 10 % infill and on the Prusa MK4 with latest firmware, do not expect less than 19 h printing time per main module.
Sorry.
You still want to know more? All right then, here is, what I did:
- I started from scratch and designed a bayonet catch turned by 90 degrees, so the tower modules now simply “sink” into one another with a little twist. To unlock them, you just pull the upper module slightly up, and then twist it out of the lower module. The same mechanism is used for the planting pods, by the way.
- Inside the main modules, I added some deflectors and guiding elements to keep the nutrient solution running down the inner wall, instead of dripping down in the middle.
- I enlarged the accessory adapters and added a slot for cable ties to them, in order to provide a cable mount.
- The dispenser module will guide the flow away from the tower’s back side (where there are no planting pods).
- I have created a little arm construction to mount some LED grow lights perpendicular approx. 20 cm away from the tower wall.
- The Euro box adapter is inserted on top of the box lid and provides 4 guiding “pins”, that will also be the anchor points for adjustable supports, deflecting the tower’s weight to the sturdy bottom of the Euro Box.
- I also designed an “inspection door” for the box, to get easy access to the pump, the hose and the supports.
- For the box adapter and the inspection door, I added templates to make cutting openings into the box lid a bit easier.
Recommendations:
- Use PETG for all parts, because it is more robust and UV-tolerant than PLA.
- Stack max. 6 main modules for a total of 24 planting pods per tower.
Like this, you will stay within the Euro Box weight capacities and have easy access to all plants. - Print all modules with 4 outer perimeters instead of 2 – it will help you delaying fertilizer crystals penetrating the tower wall.
- Use a 0.4 nozzle and 10 % infill for the main modules, as well as 15 % infill for the box adapter, the planting pods and the supports.
What can I say: I now have 2 towers of this design running on 1 Euro Box pedestal and (including 6 LED grow lights per tower) I need less then 1 square meter of space.
The towers cheerfully glug for 5 minutes every 15 minutes – for 4 months now, without any splashing or fertilizer residue building up on the outside. I have all planting pods sealed with foam discs to hold the plants or with filler plugs, to keep the light out of the tower (algae!), to keep the nutrient solution inside and to dampen the sound.
For the moment, I am satisfied with the result.
This is for sure not the best hydroponics tower ever and of course, there is room to grow
(I just started my design no. 2, allowing for a capacity of 120 plants in 6 levels on the same Euro Box pedestal...).
I plan to keep the current towers for bigger plants like lettuce or broccoli, and use the next generation with higher plant density for herbs only. But more towers will mean more light in the room, so let’s see where this will take me….
I would like to share my design with this community, because I got a lot of inspiration from the work of others, and maybe, someone will find some inspiration in this design.
Stay curious!
;-)