Replacement Clip for Ugreen Bluetooth 5.0 Receiver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement clip for the Ugreen Bluetooth 5.0 Receiver.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 253
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
A replacement clip for the Ugreen Bluetooth 5.0 Receiver. Mine broke off when the headphone cable got caught on something, so I needed to design and print a replacement.
I printed it first in PLA and it worked, but slowly deformed due to creep. After about a year it broke at the pin hole. I would recommend printing in PETG or similar for longevity.
Also tried nylon, but creep was a big issue there. Probably the toughest of the materials I've tried, but it won't be straight.
I cleaned out the hole for the pin using a (Torx) T5 bit, but obviously an appropriately sized drill bit would be better if you have it.