Toyota MR2 Turbo SW20 rain guard eliminator delete plates v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter plates to fit rubber bumpers to improve fitment and reduce vibration of lightened MR2 turbo engine lids
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 507
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Intro
I tried Shadcast's part but had trouble with the screws.
So, I designed from scratch mimicking Alex Wilhelm's design where the rubber bumpers fit in the OEM location and use the 12mm boss screw-holes from the original rain guard.
v2 increased the thickness by 3mm to ensure the bumpers meet up with the chassis tightly and made it easier to attach the rubber bumper/stopper to the plate with the inclusion of helical threading.
These plastic plates weigh less than 10 grams each using ASA at 20% infill. The equivalent metal plates weigh twice as much.
Required hardware
4x #10 5/8" sheet metal screws or oval trim screws (can re-use original rainguard screws)
2x Toyota rubber bumpers ~22mm diameter and ~35mm long with helical incision (can re-use originals)
Notes
Recommend using a high-temperature material like ASA, Nylon or ABS. But PETG is probably OK.
Print at 0.1mm layer height or adaptive/variable layer height for best results
Print with supports for best quality helical thread