1 / 4
Wood Lathe faceplate center finder 1 inch 8 TPI
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modified the Wood Lathe faceplate center finder 1 1/4 inch 8 TPI by jerometurmel design for my lathe that needed a…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
I modified the Wood Lathe faceplate center finder 1 1/4 inch 8 TPI
by jerometurmel design for my lathe that needed a 1x8 thread.
The 1/4" hex in the back can fit any standard screwdriver bit.
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Hatchbox PLA
Category: Hand Tools