QIDI Q1 Pro Angled LED Strip REMIX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled fixture for LED strip for QIDI Q1 Pro
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 153
- Wydruki
- 3
- Wyświetlenia
- 1117
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had trouble trying to fit AGENT_SMITH's angled fixture for the LED lighting on my QIDI Q1 Pro due to mobility and eyesight issues. I made a couple of changes to facilitate easier installation. M3 bolts and nylock nuts were used to attach the fixture to the printer (bolts up through the fixture and secured above the frame with the nuts) and the LED strip re-attached to the fixture using the original plastic clamps and supplied bolts.
All you will need in addition to the print is a couple of M3x12mm cap head bolts and nuts, nylock to prevent loosening, or a drop of Loctite would also do the job.
(Apologies for the crappy photo, not easy to take a photo inside the Q1 Pro!)