Loading Fork MK2 Holder for OPE, HoneycombWall, SKADIS, and others
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Loading Fork MK2 Holder for the Original Prusa Enclosure, HoneycombWall by RostaP, IKEA SKADIS, and others
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 76
- Wydruki
- 4
- Wyświetlenia
- 484
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This holder is designed for the Loading Fork MK2 and is compatible with:
- the Original Prusa Enclosure (OPE)
- IKEA SKADIS,
- Honeycomb Storage Wall.
- Direkt installation:
- double-sided tape
- countersunk head screws (M3)
- hexagon socket screw (M3) (these are the screws mainly used by Prusa)
Every design is also available in a "closed" version, featuring a 2mm backplate which closes the backside of the honeycombs. This option is ideal for a multicolor print, allowing you to add color to the backplate.
To install on the OPE, use 2 M3x6 screws to secure it from the inside. Note that the holes are intentionally offset to avoid interference with an existing screw (refer to the yellow arrow in the photo). Please ensure proper alignment during installation.
For optimal strength, I recommend setting the number of perimeters to 4 to ensure that the walls around the screw holes are thick enough. Otherwise it should be a simple and straight forward print.
The distance between the holes for installation with screws is 55mm. Additionally, there are also screw caps, which can be used to cover the screws.
A big thank you to @Saphir for creating and sharing the fantastic Loading Fork MK2!!!