L-Fence Miter Cut Setup Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Setup block for cutting miters on a table saw using an L-Fence.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I love using an L-Fence for cutting miters. You just have to line the leading edge of the L-Fence to the side of the kerf closest to the L-Fence. When I do this w/ a square, the square is always wandering away. So, I designed and printed this little rascal. The diagonal kerf tongue sets deep enough in the kerf to keep it in place when I bump the L-Fence against it, and the face coming up from the base is dead-even with the fence side of the kerf. I love using 3D prints to solve shop problems. (For more about this fabulous L-Fence, check out this article by Bob Van Dyke: https://www.finewoodworking.com/project-guides/shop-machines/build-an-adjustable-tablesaw-l-fence )