1 / 3
EMFCamp Tildagon Badge GC9A01 Screen Shim With Locator Pins — zdjęcie 1
1 / 3

EMFCamp Tildagon Badge GC9A01 Screen Shim With Locator Pins

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A shim to go under the Tildagon GC9A01 screen so it doesn't deflect placing stress on parts when depressed or bumped.

Ocena
0 / 5
Polubienia
6
Pobrania
144
Wydruki
0
Wyświetlenia
863
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

I saw a shim like this with the Tildagon project but it had nothing to hold it in place - I think it was supposed to be paired with a top cover for the screen, which I don't want. So I've designed this similar one which has two small bumps that secure it in place using holes in the screen board.

You may need to lightly whittle the prongs to fit into the holes... my PLA prints with a 0.4mm nozzle needed this and making the prongs smaller didn't really help as they're already at about the limits of my setup.

This shim should work on any project using one of these round GC9A01 screens mounted through-hole. If additional, or less, depth is needed I have also attached the FreeCAD files so it can be adjusted.

I'll leave it to the user to pick their own print settings for this but suggest it is simply done with enough walls to fully fill the shape.

Tagi