Colgate Hum Battery Model Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a minimalist stand I designed for the battery powered model of the Colgate Hum Toothbrush. This model doesn't…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a minimalist stand I designed for the battery powered model of the Colgate Hum Toothbrush. This model doesn't come with a stand like the rechargeable model and is quite wobbly when stood up on it's own. There are 2 versions of this stand listed. At 0.15 quality on my mk3s the snug fit version feels like it locks in and if you lift the toothbrush the stand will come up with it.. Some may prefer this style and it will almost certainly loosen up in time. The second version is 0.5mm wider in the opening section so it is no longer a snug fit but still works just fine.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.15
Infill:
15%
Filament:
3D Fuel PLA Grey
Category: Bathroom