1 / 3
Coffee creamer to plant watering container. — zdjęcie 1
1 / 3

Coffee creamer to plant watering container.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1 quart Coffee mate creamer jar used for plant watering.

Ocena
0 / 5
Polubienia
6
Pobrania
24
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I grow vegetables in plant pots and needed a way to provide water without just dumping it on the top of the soil.
There is a file for a cap that is also good for checking the fit.
The Drain-sleeve helps with getting the water into the soil and not get soil in the tapered spout. 
I used a large screwdriver to create the hole for the sleeve in the soil, this also creates a path for the water to go down.
The spout has a small hole in it to let air in.  When the water in the sleeve reaches the hole the water is stopped. 
Without the hole the water didn't drain.

NEW VERSION:  Spout-V2-P1-POS.stl  Has better thread match for the latest Coffee mate creamer bottles.  I think I used some very old bottles for the Original file.
Threads ON much easier now. 

The STL files are in the print configuration I used.
I printed the parts with the following settings....
PLA filament
0.4mm Nozzle
.2mm layers
3 walls 
20% infill 
Support Touching Build plate only –                                                                                                             support needed for the spout only: Support Overhang Angle 70 degree
Support Pattern used: Lines 
 

Tagi