38mm manual pool vaccum adapter to 32mm hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you have manual pool vacuum for 38mm hose but only have 32mm hoses? This also spins around - no tangling.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 705
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
This may not be model for general use, I share it here so that I have a backup copy.
I have manual pool vacuum cleaner that is suited for 38mm hoses, but I have only 32mm hoses at home. Adapters and hoses are not cheap, so I made myself this adapter. It may not work for you, though - the hole on the vacuum side is made specifically for my vacuum and yours may have slightly different radius. The hose part on the other hand should work with 32mm hoses just fine.
I have printed first in PLA just to see how it fits. Final product is in PETG because it goes in the pool (chlorinated) water and resides on direct sunlight or in a box (that is on direct sunlight). I did 100% infill. You may want to download “with brim” files or add custom brim to the “no brim” parts as if you don't, it may get free while printing.
After printing you just slide hose adapter through the vacuum adapter (as seen on photo) and you mount it on the vacuum and connect the hose. You will probably want to use hose clamps for both of them. This adapter not only goes from 38 to 32mm but also angles a bit and gives you freespin meaning no tangling of the hose and no twisting force you have to overcome when vacuuming your pool.