Roomba robot vacuum base charging contact holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To replace melted charging contacts on Roomba robot vacuums. Original metal bit required from the melted one.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 608
- Wydruki
- 1
- Wyświetlenia
- 2095
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The charging contacts on some of the bases for the Roomba robot vacuums seem to be prone to overheating and then the plastic part melts and squishes sideways - then the robot won't charge any more.
This is a replacement bit of plastic for the metal contact to fix to. The metal clips over, the little plastic nubbin sticks through the hole then you can use a soldering iron to melt the plastic nubbin so it holds the metal contact in place.
Fusion file included so you can tweak things if required - but it seems to have fixed the bad charging base which I just bought from ebay :)