Bambu Build Plate Holder with 14 tapered slots & tongue.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambu Build Plate Holder with 14 tapered slots & tongue.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remake of Debren27's awesome model:
https://www.printables.com/model/304326-bambu-build-plate-holder-with-2-8-tapered-slots-op
I completely redrew it, but all dimensions except for the width to hold more build plates of course and the thickness of the tongue, are the same.
I increased the tongue thickness from 1.6mm to 2mm so it fits more snug under the Eibos Polyphemus Filament dryer.
You will need a printer with a big print bed (at least 311mm when you print diagonally).
This version has the hexa-grid drawn in.
No need to play with infill and layer heights. Just print..
(Will take some time though.)