1 / 5
Taller Shock Absorber Dust Cap for 2019 Hyundai Santa Fe — zdjęcie 1
1 / 5

Taller Shock Absorber Dust Cap for 2019 Hyundai Santa Fe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a taller "dust cap" for the rear shock absorber on a 2019 Hyundai Santa Fe

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
162
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

While replacing the rear shock absorbers on my 2019 Santa Fe, I found that the replacement part was about 1mm taller than the original, resulting in the “dust cap” not fitting into the slots anymore.

This dust cap is about 3mm taller than the original which allows for more space for the “push rod” while still fitting on the vehicle.
 

Print Settings

I printed this using eSUN PETG at 0.2mm layer height

Note that the orientation here is a bit tricky: I printed it as a “hat” (wide side down) and added a support blocker “inner” and support enforcer “outer” cylinders to allow the floating outer rim to be supported. See the attached images for reference.

 

Tagi