1 / 3
Case for Greaseweazle F7 and 3.5" floppy drive — zdjęcie 1
1 / 3

Case for Greaseweazle F7 and 3.5" floppy drive

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A case for the Greaseweazle floppy drive controller, F7 version. Also features an external molex power connector, but…

Ocena
0 / 5
Polubienia
3
Pobrania
43
Wydruki
0
Wyświetlenia
444
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

A case for the Greaseweazle floppy drive controller, F7 version. Also features an external molex power connector, but you usually won't need it.

Designed for brass threaded inserts. Use a soldering iron to set them into the holes.

This takes a long time to print because it is quite big.

Hardware required:

  • Molex to 2x berg floppy drive power connectors.
  • Brass threaded inserts:
    • 8 x M3x5
    • 3 x M2x3
    • 2 x M2x5
  • Bolts:
    • 8 x M3x10 allen wrench
    • 3 x M2x4 allen wrench
    • 2 x M2x8 allen wrench
    • 4 x M3x5 philips (to mount drive)

Category: Computer

Tagi