Breech Replacement for Marshmallow Extreme Blaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the front end of the Zing Marshmallow Extreme blaster.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is for the Marshmallow Extreme (or Xtreme) nerf blaster. I wanted to be able to attach a sealed barrel to this to launch Nerf Mega XL darts, and there wasn't a design that facilitated this. The breech pivots at two points to allow plenty of clearance for MXL, and also gets a fairly nice seal of the front gasket of the blaster.
The breech reuses the upper latching components and all screws from the blaster's original breech. Other required hardware includes:
- 2x screws, M4, 25mm long
- 2x nuts, M4
- 1.25" outer diameter Sink Drain Tailpiece, any length. This must be specifically the thin walled tubing in order to fit MXL darts.
The parts print without supports, use plenty of walls and infill. If you want to modify the files for any reason (e.g., switching to a different barrel material), I have posted the STEP file as well.
Enjoy!