Front weight for the MK2/MK2.4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front weight for the MK2/MK2.4
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As the tractor has a little less weight at the front, I have created an additional weight. It is attached to the frame together with the engine cowling.
To make it look a little better, there is a sleeve that is slid over the nuts.
Parts needed:
1x M6x70 bolt
2x M6 washers
M6 nuts
First a divider of the bracket is placed on the bolt, then a washer. Then screw the required number of nuts onto the bolt. Then slide the sleeve onto the nuts, use a washer as a cover and finally screw on the 2nd side part.
The weight can be adjusted using the 2 rows of holes.
The weight fit on all Versions of the MK2 and MK2.4.