Heavy Duty Backpack Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Backpack Hanger with 2 hooks for more even load distribution. Tested to hold up to 30lbs!
- Ocena
- 5 / 5
- Polubienia
- 356
- Pobrania
- 875
- Wydruki
- 6
- Wyświetlenia
- 4971
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
Printed with 3 perimeter walls around the bottom of the model and 4 perimeter walls around the hooks.
5% infill for the bottom and 15% for the hooks.
Material used is PLA+ from Eryone.
Print it laying flat on its side so that the layer lines are not perpendicular to the force being applied to it.
If even more strength is needed, I recommend flipping it 45 degrees so that the print lines are not parallel nor perpendicular to the downwards force.
Can hold up my IOTV with plates (30lbs) with no signs of bending or warping due to the weight.
Heavily Inspired by https://www.printables.com/model/851702-bag-coat-hanger