1 / 4
Original Prusa Enclosure - Filamentguide for MMU3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original Prusa Enclosure - Filamentguide for MMU3
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
Additional Parts
5x V6 Heatsink Collets
4x Threaded Inserts M3 x 3,5
2x Screws M3 x 6 for filamentguide 1-2 and 3-4
2x Screws M3 x 8 for filamenguide 5

Changing the Installation Location of the Advanced Filtration System.

The PTFE tube is pushed through the collets into the insertion opening.

-The ends of the tubes facing the filament spool should be chamfered on the inside (a 2mm center drill is recommended for chamfering)