Buffer holder for wall mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace the long "buffer holder" part with this to hang the buffer from a wall with #8 screws. Based on R4 buffer holder
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 356
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I made this part because my printer is in an enclosure and I wanted to hang the buffer vertically on the wall (cassettes facing down) above the enclosure. It replaces the long “buffer holder” part from the MMU3 printable parts set. The photo shows the mounting location, but with unsightly foam mounting strips that I used before I printed this part.
I printed this with the screw holes perpendicular to the platen. Use the same recommended settings as for the MMU3 printed parts (PETG, 20% infill, 0.2mm QUALITY/STRUCTURAL). The holes are sized to allow #8 wood/sheet metal screws. Be sure to use proper drywall anchors if you're mounting to drywall.