1 / 2
1/4" x 1" and 3/4" 20 TPI bolts, nuts, and washers — zdjęcie 1
1 / 2

1/4" x 1" and 3/4" 20 TPI bolts, nuts, and washers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nuts, bolts, and washers done up from scratch in a metric STL file. Meant to be interchangeable with standard

Ocena
0 / 5
Polubienia
12
Pobrania
231
Wydruki
0
Wyświetlenia
622
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Nuts, bolts, and washers done up from scratch in a metric STL file. Meant to be interchangeable with standard (not metric) SAE nuts and bolts I had on hand. The bolt is about .4mm smaller diameter than 1/4". And the nut is about .4mm larger, providing a snug fit that can be hand-tightened on either the steel or plastic bolt. I also wanted a Phillips head.

The 7/16" hex heads came out slightly larger than comparable steel ones, when printed. But they are still under 7/16" And they fit in my hex sockets with the expected backlash.

If you are looking for something different or not quite this, try the preexisting Nut, Bolt, Washer and Threaded Rod Factory by mike_mattala . https://www.thingiverse.com/thing:193647

I also made some 24 TPI https://www.thingiverse.com/thing:4742697

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.16

Infill:

60%

Filament: NA PETG

Black

Notes:

Fine slicer settings recommended. But usable with normal settings.

How I Designed This ===================

I used Blender with nut and bolt extension.

Category: DIY

Tagi