KYZ HSW Display Stand - Medium
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A thickened HSW wall piece with a sturdy base and non-slip feet
- Ocena
- 5 / 5
- Polubienia
- 440
- Pobrania
- 1630
- Wydruki
- 14
- Wyświetlenia
- 6122
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi!
I have made free-standing HSW walls before using these foot pieces that attach to any wall but I wanted something more sturdy and more built-for-purpose and this is what I came up with.
Enjoy!
Print setting recommendations
Print the vertical wall piece with minimum 3 perimeters,
Print the horizontal piece with minimum 4 perimeters, 4 bottom layers and 5 top layers,
Print the feet with TPE or TPU - softer the better. The feet are optional.
Do NOT use silk PLA - the layer adhesion can be poor with silk filament and the triangle connectors may delaminate.
Hardware
No additional hardware is required. Provisions are available for some M3 screws for additional security but these are completely optional (M3x10 cap screws or button head screws).
Recommended accessories
 |  |
 Bowls - 8 sizes available |  Round Shelves - 8 sizes available |
 Price/description labels - 10 sizes available (Paid model - for commercial use) |  Ball holder - 6 sizes available |
 Cups and collars - 9 sizes available of each |  Keychain Hooks - 4 sizes available |
 |  |
If you would like to say thanks, you could buy me a few metres of plastic on Ko-Fi otherwise, please post a make and check out my other HSW models in this collection.