loom boom, comb and shuttle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrades and extra parts for Søstrene Grene loom, or for making your own
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 1066
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a nice, simple loom at Søstrene Grene, but it didn't have a comb matching the spacing, aaaand then I decided to upgrade the boom so it held the strings better. And why not try if a netting needles made good weaving shuttles? Maybe these parts will be useful for making simple frame or cardboard looms.
Use variable layer height for better smooth slopes on the comb and shuttle. PLA or other stiff filament recommended, especially for the boom. It's got a solid core to the model and should not bend too much, even with 10% gyroid infill, but more linear fills are perhaps more rigid. Edit: after some testing, have added an older boom design which was more rigid.
Not affiliated with or copied from the lovely BoomLoom.
Made in blender 4.1
Feel free to request more parts, though I'm not sure plastic is suitable for a full loom because of its flexibility.