GEPRC Cinebot30 GPS mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A GPS mount for GEPRC M8/M10 (22x22mm) GPS for the Cinebot30
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 699
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a GPS holder for the GEPRC cinebot30. The mount fits 22x22mm GPS. The GEPRC M8 and M10 have this size, and I know some other popular brands have the same size.
v2 is the original model from Riley Gibson https://grabcad.com/library/goggles-x-general-plate-gxgp-1/details?folder_id=13999796
v3 has been modified to add a bit of extra support on the overhang for printers which are not capable of doing longer overhangs.
Even without support this model should print and be completely useful and well finished from above (you may have a bit of ugly bridges under the holding part if your printer is not very well dialed.
Feel free to add support if you decide is needed.