1 / 2
Microphone Holder/Lekato Microphone Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
PRINT IN THE SAME ORIENTATION YOU MOUNT IT IN, SUPPORTS ON. PRINT IN A HARD MATERIAL LIKE PLA.
The diameter of the holder part for each microphone is 37.1mm. It's made for wireless microphones, because there is nowhere to put the wire through easily for a wired one. However, you can cut a small hole like I did with wire cutters to fix it. It has 3 screw holes that work with really any screw of your choice. The diameter of it is 3mm. You still have to drill your screw in. Print it the same orientation you would mount it, and it would only need support for the 3 screw holes.