Mamotion Luba RTK bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The expensive OEM version didn't work for me.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 787
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
The Mamotion bracket wasn't long enough to get out from under my eaves. So I made this bracket and used PVC to connect two of these brackets together. One bracket goes onto the RTK unit and the other to the exterior wall. In my case I had tapered siding so I had to use a combination of the wedges to get the arm level coming out from the house. The wedges are included in the zip file.
I printed in PETG with 4 perimeters for strength. I wasn't sure at first if this would be strong enough to meet the needs of the RTK to be nice and steady, but I've used this for a while with no problems.