Enkei Racing 75mm center cap replacement for the brushed aluminum caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't bother spending $40+ on new center caps when you can just print them here.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 405
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
UPDATED!
I have uploaded a Version 2 of this model that has more reinforcements for the tabs. Just removed my own (original design) and 3 out of the 4 had a broken tab. So I added more plastic in that area. Made the cap about 0.2mm thicker too so the aluminum caps sit more flush with the wheels.
Broke my original plastic caps from not removing them prior to going out on track and warping them from brake heat. Looked at the original design and just made my own that doesn't require a metal ring clip inside. It's also a lot easier to put the center caps back in compared to the originals that didn't like being pushed in crooked.
- I used a thin 3M double sided tape to put the brushed aluminum piece on top of the printed caps.
- I printed these on a smooth build plate. It helps with the double sided tape to stick on. Textured DEI plates don't seem to stick well and you could potentially lose your brushed aluminum piece while driving.
- I also printed these out of ASA since they will be seeing the hot summer weather. You can print this out of PLA if you want.
This replacement cap is meant for the following Enkei wheels:
- GTC02
- RS05RR
- NT03RR
- GTC01RR
It's possible these can fit other Enkei wheels with as 75mm center bore.