Behringer iNUKE Series Volume Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The orange ring has always bothered me and now it is being put to good use. This hides the ring except to show the set…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The orange ring has always bothered me and now it is being put to good use. This hides the ring except to show the set volume. A before/after pic is included, the original dial on left, new dial on right.
This knob should work for all iNUKE series amps, yet can only confirm the NU1000DSP and NU6000DSP as I own them.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/26NA2dDtBzC
Please post pictures of your print, I would love to see them. Enjoy!
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Ultimate
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
15%
Filament: Monoprice PLA
Black
Notes:
Support X/Y distance 2.5mm (for supporting ring while not blocking D shaft), while not necessary, I also set Cura Support blocker for bottom of knob and outer ring with 100% infill
Category: Replacement Parts