XRP Files in DWG/STEP/etc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recreated the 3d models used in the XRP Competition. Made available in all formats that Printables lets me upload.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 252
- Wydruki
- 1
- Wyświetlenia
- 997
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 8/1/24: I noticed that I missed a hole for the battery lid on the holey version of the chassis, this has been added.
Added CAD files for Caster, Tire (both stretched out and not), Motor and Servo motor (including Single Arm/Double Arm/Four Point and Circle Micro Horn), i.e. the items that come in the kit.
The models of the items in the kit should be at least within 0.1mm from the originals, based on 2D drawings and measuring with calipers.
The models of the original 3mf-files should be within 0.01mm from original files everywhere except for the following:
Lifter Clip:
One fillet of a fillet between two other fillets ended up missing a small chunk. I spent a couple of hours trying to get them right (fillets on fillets between fillets require a lot of computing before realizing that they don't want to be created) and finally decided that it should be good enough.
Frame v1.3 & 1.5:
The front chamfer is evil and will forever be around 0.14mm (0.2mm diagonally) off due to the midline separator splitting the front face. If you for some reason need this to be exact, ask me very nicely and I might take another look at it.
If you have downloaded my previous version of the original frame, please feel free to delete it and use this one instead, it is much more accurate.
Wheel:
I am currently having issues with 3 of the faces of the wheel model's dwg either not properly exporting to .3dm or onshape not properly importing the .3dm so I am still working on getting the exports to .step and .sldprt for it.
Please let me know if y'all find any errors or if some of the files didn't export properly.