1 / 2
Carbon fiber yagi boom connector satran mount — zdjęcie 1
1 / 2

Carbon fiber yagi boom connector satran mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of the boom connector of the Carbon Arrow Yagi to mount to a satran

Ocena
0 / 5
Polubienia
5
Pobrania
18
Wydruki
0
Wyświetlenia
311
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

This replaces the boom connector on the Carbon arrow yagi, the part that connects the two ends of the carbon fiber tubes. It adds a mount for the Satran and turns the element to be at a 45 degree angle. Mount the rest of the elements to follow the same angle.

With the elements turned at a 45 degree angle it allows the antenna to be mounted almost centered on the satran, but the elements do not hit the satran when elevation is either 0 degrees or the full 90 degrees. This makes the antenna weight almost even on both sides, with a very slight forward weight which is recommended by the satran creator.