Electronics Tray for The100 Tank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an electronics mounting tray designed for The100 Tank edition.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is designed to mount inside The100 Tank edition frame, and has mounting for BTT Octopus, Raspberry Pi Zero, and power supply.
Just use longer screws and nuts where possible to mount the tray to the inside of The100's frame.
You may need to modify the power supply mounting holes, we had to drill them out just a little bit to get everything to work out.
4x m3 brass inserts are needed to mount the Octopus board.
We also used computer standoffs and nuts to mount the Pi to the side of the tray. This works well for now but may modify the design to mount a full size Pi 3/4 instead.
Uploaded full Step file so you can split the model however you would like for printing on smaller bed.
Print settings:
Really anything you like, no supports are required.