BTA Bottle Cage Riser for TT and Tri Bikes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5, 10, 20, and 50mm .stl files for quick print. The .f3d file has a sketch template to custom extrude. Bolt holes 5.5mm.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 652
- Wydruki
- 0
- Wyświetlenia
- 2695
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Just updated the files to v2, enlarging the bolt holes to 5.5mm to accommodate a m5 bolt diameter easier.
My wife needed a bta (between the arms) bottle cage riser for her 51 Speedshop cockpit on her tribike. Figured I'd share the design in case someone else has use for it. The .f3d file has the sketch template that you can extrude the shape to any height. I included .stl files for common sizes: 5, 10, 20, and 50mm. Riser is 15mm wide x 80mm long. Cage bolt holes are standard distance of 63.5mm on center.