Motorcycle (Bobber) signal light wiring boot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motorcycle (Bobber) signal light wiring boot to protect and cover mount threads and wiring.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I purchased these signal lights from Blue Collar Bobbers (https://bluecollarbobbers.com/shop/1929-ford-rear-light-kit-750-shaft/)
This kit is for a Honda Shadow. They sell packages with these lights with other brackets for other makes and models of bikes so this boot **may** work for them too. If you decide to use this and they work for yours and it's a different kit, please comment and let others know what it's been tested on.
I didn't want the threaded hollow shaft showing with the wire coming out (pictured), so I made this and printed it out of flexible TPU. You thread it on the covered wires before installing and it should wrap around the nut.
Depending on the tolerances, you may need to wrap the narrow end of it with tape to secure it to the wire covering (pictured). This will keep it from working it's way off the housing.