DC 12V Power Adapter for Makita LxT Batteries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DC 12V Power Adapter for Makita LxT Batteries
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 369
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is a project to build a 12V power adapter, powered by Makita LxT 18V batteries.
All the components and modules fit into a 3D printed case. The 3D printed case consists of two parts, a battery plate and a case cover. The case is secured to the battery plate by four 3.5 x 15mm countersunk self-tapping screws.
Features
- 12V 5A continuous
- Undervoltage battery protection.
- Current limiting above 6A.
- Continuous digital display of voltage, current and wattage.
- Progressive fan cooling as unit warms up.
- Power efficiency: ~93%
- Quiescent operating current: ~30mA
- 12V banana sockets power delivery.
- Utilises commonly available Makita 18V LxT batteries.
My print is made in Bambu Lab PLA Tough Gray filament, with 0.2mm layer height and 25% infill on a Bambu Lab X1 Carbon printer. Print supports are required.
I hope that you can find this print useful, too.
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.
For my latest models, see my main uploads site at MakerWorld as “Wiseone”.