Nerf N1 dart cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple dart cutter to remove the DRM nub on the back of the Nerf N1 darts making them roughly 45mm long.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 59
- Wydruki
- 2
- Wyświetlenia
- 1263
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple dart cutter to remove the DRM nub on the back of the Nerf N1 darts making them roughly 45mm long. This will make the darts much more accurate when putting more power behind them. It will require the removal or modification of the AR systems of any N-Series blasters.
Edit: Version 2 has been added to the file set that adds holding tabs for an ambidextrous cutting jig! I found that I didn't feel comfortable holding the outer edges and these tabs give you some extra, safer spots for holding the jig while cutting.
I am making other models for the N-series blasters to make better use of the cut-down darts.