1 / 8
Eachine EV800D Crazy Hat support
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small component to convert a sport hat into a goggle support. Eachine EV800D
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 658
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a part to convert your ugliest hat into a fpv goggle device!!
Surprisingly comfortable compared to the original straps and easy to lock and unlock your goggles.
Material:
- 3 x M3x10 bolts
- 1 x M3x25 bolt for the lock knob (optional)
- 3 or 4 mm drill bit
Instruction:
- Insert the 3d component and mark the points (on the hat) where to drill (blue arrows)
- I personaly suggest to tap all the printed part holes with a M3 threads
- Allign and screw the 3 bolts.
- Thats it!
You can drill the hole in the middle too, for the long bolt to secure the goggles, but its not mandatory.
PS: The 3d model in the pictures its a bit different from the one uploaded.
Compatible and tested with Eachine EV800D.
If you print the part I'd love to see the final result please!