First Layer Test Print - X1C P1P - Adjusted for New Flow Calibration Pattern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of another model, I'm including the .3MF file after I scaled the original STL up 115% in X and Y.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 187
- Wydruki
- 0
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Basically a test print of an STL file, with a 3MF profile so this is a little easier to work with. If you have the latest flow control calibration (i.e. the latest firmware), your preview screen should look like the .PNG I shared here.
Do not scale in the Z, if you want this to be a first layer print. This has a Z height of 0.2mm, so if you are printing with a 0.2mm layer height (and 0.2mm first layer height), it should be a single layer. Obviously, you could make this into a 0.1mm single layer by scaling 50% on the Z. And you could do a 0.4mm single layer by scaling it up 200% in the Z. If my high school algebra serves me right, 150% should give you 0.3mm. Easy, right? When you scale in Bambu Studio, it shows you the Z height, and you can probably even tell it exactly how high you want it to go, rather than fiddling with percentages.