OpenTheremin v4.51 Case with extra depth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The standard case from https://www.thingiverse.com/thing:5022371 with the back bumped out for extra space for mods
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 16 Jul 2024:
I wasn't satisfied with the rigidity of the antenna mounting, so I made a few small changes to the case and added second model, a little plug that connects the banana plugs and is constrained by the tower behind the electronics. Much better!
I got the OpenTheremin v4.51 kit, and puzzled over how to switch it to left-handed use while maintaining the overall form factor. My solution was little jumper cables and nylon washers and screws to jump each banana plug over to the opposite contact on the board. This increased the height of the stack on each contact, so to accommodate this and the jumpers, I bumped out the back as you can see. Printed on the longer side of the back with support for the short angle. I did mine in black Overture Matte PLA.