PC4-M10 mod for EIBOS Polyphemus lid tray mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod for the EIBOS Polyphemus lid tray mod that uses 3x PC4-M10 connectors instead of ECAS connectors
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 117
- Wydruki
- 2
- Wyświetlenia
- 603
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I really like the Eibos Polyphemus filament dryer but it is a pain to open the lid every time I need to change a spool or feed filament. The mod that falcon14141 has made is an awesome improvement.
I did not have ECAS connectors on hand, but I had a lot of PC4-M10 PTFE connectors. Therefore I slightly modded the panel to use these connectors.
Bill of Materials:
- 3x PC4-M10 PTFE connectors
- The rest is the same as the original (minus the ECAS connectors)
I printed this and the other parts of the original mod in Overture ABS at 100.5% size to compensate for shrinkage. PLA, PETG, ASA, etc. will probably also work fine.
If you have any questions or comments please let me know. Let me know how your print turned out by posting a make.
All credit for the original mod goes to the designer falcon14141 !