Motorcycle Carburetor Air Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motorcycle carb air filter connection/housing/etc
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Motorcycle carb air filter connection/housing/etc
my carb has an inlet pipe thats 44mm
I had done the voronoi skull first, worked well for years. I used a different skull i found online, just becuase it seemed to perhaps let less rain water in, if that was the case….
Its still not “rain safe”, fyi.
I printed them in PLA without any problems. try to use a higher infill percentage. I normally aim for 4-6 walls/top/bottom, and 25%+ infill
Filter material can be a variety of products, ask your local trusted mechanic. Personally i use a metallic screen, as well as a metallic scrubber like the ones used in the kitchen.