Hex Bin for parts storage with clear lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upset with the usability of gridfinity, I designed these hex bins to print fast, be finger friendly, an use pringle lids
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
These hex bins are an alternative to gridfinity that fix the usability problem of the compartments being too small. You can easily grab screws from these hex bins. They also have the same storage capacity of a dual bin gridfinity.
The clear lids make contents easily viewable and prevent spills. Even smallest of parts won't mix between bins with the lids on. The hex bin lids are free with the purchase of crisps and can be bought at millions of stores worldwide.
These hex bins should be printed with a 0.6 nozzle or 0.8 nozzle with a line width of 0.8 in vase mode. These have been tested with ABS, ASA, ABS CF, ASA CF, ABS GF. The hex geometry and ribs make them very strong, even with single perimeter.