Bolthead Fridge Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Refrigerator magnet that looks like a bolt head. I plan to use these in my garage and kitchen.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Loved the idea but didn't have 12mm magnets, so I replaced the 12x3mm magnet cavity with 3 smaller magnet cavities designed for tight press fit.
The 8mm version was designed to be the same or nearly the same size as the original model, but it was created in Fusion 360 because I suck at editing mesh bodies. The 10mm version is simply an enlarged version.
The 8mm version takes 3 6x2mm round magnets.
The 10mm version takes 3 8x3mm round magnets.
Recommend printing just the first 2-3mm to test fit clearance.
Thank you @Frammis for the idea of the color change!
The 3mf files for Mk3S+ and Mk4 have color change added.