1 / 4
Case for Raspberry Pi with UPS hat (X728) and optional heatsink — zdjęcie 1
1 / 4

Case for Raspberry Pi with UPS hat (X728) and optional heatsink

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case for Raspberry Pi with UPS hat (GeekWorm X728) and optional heatsink GeekWorm P165-B.

Ocena
0 / 5
Polubienia
0
Pobrania
58
Wydruki
0
Wyświetlenia
424
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

I needed to install UPS shield/hat on my Raspberry Pi and keep it safe… turns out the UPS board is larger than the Pi so I had to design it myself. 

UPS hat: GeekWorm X728
Heat sink: GeekWorm P165-B

The case fits both options - with or without the heat sink. You just need to use the proper spacers (that already come in the X728 kit).

I have MMU3 so I also provided a 3MF file with translucent window for the battery charge status as well as some simple instructions on top. STL are plain with no MMU support.

I made holes only for the following:

Pi board

  • SD card
  • Activity and Power LED
  • Power, 2x HDMI, Audio Jack
  • 4x USB, Ethernet

UPS hat

  • Power
  • Status and power LED
  • Power button (top)

Tagi