Spring Thunder Tuning Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A variety of remixed Spring Thunder parts that solve issues I had with my build.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are a variety of Spring Thunder parts I remixed to address some issues I had with my build.
Tube follower: Tapered the front face of the part to prevent it from catching on the seam between the pvc shell tube and the main body of the blaster.
Trigger bar: When I first built my Spring Thunder, the trigger had to be mashed all the way back into the grip to get the catch to release, and it often wouldn't release at all. I solved this issue by extending the trigger bar by 5mm.
Extractor: I had a ton of issues with the extractor not holding on to the shell long enough for it to hit the ejector, and the shell would often fall back into the action, jamming the whole system. This extractor has been extended and wraps slightly underneath the shell, and has space to put two springs on it instead of one.