BigTreeTech Mini 12864 Display Case for Ender 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display for your BTT Mini 12864 for your Ender 3, mounted left side.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 134
- Wydruki
- 2
- Wyświetlenia
- 628
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for a BTT Mini 12864 display to put on the left side of whatever printer that has a 4040 extrusion. This is designed to be as slim and small as it could possibly be but also still somewhat looks nice. This model also features an SD card slot door. No supports are needed and all parts are oriented for easy printing
Socket Head Screws and a paperclip is required.
2x M5x5 Screw. (You can refurbish one from the stock LCD display mount)
2x M5 Hammer Nuts (To attach the LCD to the frame)
1x Paperclip. (For the hinge of the SD door)
1-2x M3x15 Screw (For the top left screw hole or/and the bottom right screw hole)
2x M3x10 Screw (For the bottom left and top right screw hole
2x M4x8 (To attach the LCD to the bracket)
1x M3 Hex Nut (Secure a M3 screw)
1x M3x20 Screw (IF you dont have 2 M3x15 screw, you can use this for the bottom right screw hole)
To make sure the LCD does not flex when you use it, print the bracket with dense infill and 3+ perimeters.