1 / 3
Prusa PSU Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PSU holder for Prusa Black Delta Electronics PSU for attaching to Ikea Lack Enclosure build.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
PSU holder for Prusa (Black) Delta Electronics PSU for attaching to Ikea Lack Enclosure build.
The model utilizes the threaded side holes to securely mount the PSU to the mount/bracket. The resulting mounting is sturdy and secure.
Print with 0.2 LH and 0.6 extrusion witdth for descreased print time.
Installation:
- Drill a big enough hole to the Lack Enclosure or route the cables through the leg hole if long enough.
- Secure the left side of the mount to the leg of the table by 2 M4 self taping screws.
- Mount the PSU, align the Right_Mount and mark its place with a pencil, make sure the side screws are able to thread into the PSU.
- Remove tha PSU, secure the right bracket with a M4 screw.
- Mount the PSU to the holder and secure it with 2 M3x6 mm screws.