Eero 6 wall bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remixed mount is based on the design found at https://www.thingiverse.com/thing:6024474 I have made the mount…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 254
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v2.0
This remixed mount is based on the design found at https://www.thingiverse.com/thing:6024474
I have made the mount thicker as the original I found to be very thin and prone to cracking at the base, I have also widened the mounting holes and put a chamfer on them to accommodate countersunk screws (I mounted mine using number 8 screws).
I have included the step file so that anyone can make changed easily.
Print Settings
Printer Brand:
VoronDesign
Printer:
Voron2 350
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Filament: Any PLA, ABS, PETG
Any
Category: Other