Nekrozma Dawn Wings - Pokemon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pokemon model in 6 easy to assemble parts
- Ocena
- 0 / 5
- Polubienia
- 54
- Pobrania
- 283
- Wydruki
- 0
- Wyświetlenia
- 1538
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello everyone ! New Pokemon model !
Only the body (Part 5) is a bit harder to print with an FMD printer, you will probably need some grinding on the edges of the wings. I tried making the wings larger but it just looks really bad.
Part by part guide :
Part 1 & 2 : no supports low layer height for smoothness
Part 3 & 4 : organic supports with low layer height
Part 5 : Organic supports, minimum layer height possible. Printed ok on the first time but the level of detail asked on my entry level printer is a bit too much. Ended up being really nice anyway after some work.
If you want to size up the model, feel free to do so, the model will be easier to print (size everything up so there is no fitment issues).
size 20x15cm H 13cm. Parts glued together with Tamiya putty
Note : if you looked closely to the pictures, the hands have been forgotten. No worries they are now added to the model.